在 CentOS7.2 上安装 OpenStack Liberty 版

安哥网络 · 发表于 2017-7-6 12:22:38

在 CentOS7.2 上安装 OpenStack Liberty 版
一、约定二、概述

openstack 主要服务组件

三、环境准备

本次实验在虚拟机里面安装，共两个节点 controller、 compute1，每个节点设置两个IP地址，其中一个网段是可以上网的，另一个网段用来管理，我这里只用了一个网卡，只安装核心的几个组件 keystone、glance、nova、neutron

Controller Node: 1 processor, 4 GB memory, and 5 GB storage
Compute Node: 1 processor, 2 GB memory, and 10 GB storage

3.1 安全Password name DescriptionDatabase password (no variable used) Root password for the databaseADMIN_PASS Password of user adminCEILOMETER_DBPASS Database password for the Telemetry serviceCEILOMETER_PASS Password of Telemetry service user ceilometerCINDER_DBPASS Database password for the Block Storage serviceCINDER_PASS Password of Block Storage service user cinderDASH_DBPASS Database password for the dashboardDEMO_PASS Password of user demoGLANCE_DBPASS Database password for Image serviceGLANCE_PASS Password of Image service user glanceHEAT_DBPASS Database password for the Orchestration serviceHEAT_DOMAIN_PASS Password of Orchestration domainHEAT_PASS Password of Orchestration service user heatKEYSTONE_DBPASS Database password of Identity serviceNEUTRON_DBPASS Database password for the Networking serviceNEUTRON_PASS Password of Networking service user neutronNOVA_DBPASS Database password for Compute serviceNOVA_PASS Password of Compute service user novaRABBIT_PASS Password of user guest of RabbitMQSWIFT_PASS Password of Object Storage service user swift3.2 网络

关闭网络管理工具

关闭防火墙和SELinux（两端）

[root@controller ~]# systemctl stop iptablesFailed to stop iptables.service: Unit iptables.service not loaded.[root@controller ~]# systemctl stop firewalldFailed to stop firewalld.service: Unit firewalld.service not loaded.[root@controller ~]# setenforce 0

添加IP地址（controller）

[root@controller ~]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736 #修改/添加如下内容BOOTPROTO=noneONBOOT=yes####第一个IP地址，用于对外服务####IPADDR0=192.168.100.130NETMASK0=255.255.255.0GATEWAY0=192.168.100.2####第二个IP地址，用于管理####IPADDR1=10.0.0.11NETMASK1=255.255.255.0

添加IP地址（compute）

[root@compute1 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736 #修改/添加如下内容BOOTPROTO=noneONBOOT=yes####第一个IP地址，用于对外服务####IPADDR0=192.168.100.131NETMASK0=255.255.255.0GATEWAY0=192.168.100.2####第二个IP地址，用于管理####IPADDR1=10.0.0.31NETMASK1=255.255.255.0

配置hosts（两端）

[root@controller ~]# echo "10.0.0.11 controller" >> /etc/hosts[root@controller ~]# echo "10.0.0.31 compute1" >> /etc/hosts3.3 NTP

CentOS7 中时间服务变为 chrony 了

服务端操作

[root@controller ~]# yum install -y chrony[root@controller ~]# vim /etc/chrony.conf#添加如下行allow 192.168.100.0/24allow 10.0.0.0/24[root@controller ~]# systemctl enable chronyd.service[root@controller ~]# systemctl start chronyd.service

客户端操作

[root@compute1 ~]# yum install -y chrony[root@compute1 ~]# vim /etc/chrony.conf#注释掉默认的NTP服务器#server 0.centos.pool.ntp.org iburst#server 1.centos.pool.ntp.org iburst#server 2.centos.pool.ntp.org iburst#server 3.centos.pool.ntp.org iburst#添加下面这行server controller iburst[root@compute1 ~]# systemctl enable chronyd.service[root@compute1 ~]# systemctl start chronyd.service

验证

[root@controller ~]# chronyc sources210 Number of sources = 4MS Name/IP address Stratum Poll Reach LastRx Last sample===============================================================================^? 202.118.1.130 0 8 0 10y +0ns[ +0ns] +/- 0ns^? news.neu.edu.cn 0 8 0 10y +0ns[ +0ns] +/- 0ns^? dns1.synet.edu.cn 0 8 0 10y +0ns[ +0ns] +/- 0ns^* time5.aliyun.com 2 6 377 16 -71us[ -243us] +/- 24ms[root@compute1 ~]# chronyc sources210 Number of sources = 1MS Name/IP address Stratum Poll Reach LastRx Last sample===============================================================================^* controller 3 6 17 42 +1644ns[ -117us] +/- 26ms3.4 OpenStack安装包(两端)

首先要禁用系统原有的epel源

安装OpenStack提供的epel源

# yum install -y centos-release-openstack-liberty# yum install -y https://rdoproject.org/repos/ope ... release-liberty.rpm

安装 python-openstackclient

# yum install -y python-openstackclient

(可选）如果在yum安装过程中遇到问题，可以改用阿里源

[root@controller yum.repos.d]# vim CentOS-OpenStack-liberty.repo [centos-openstack-liberty]name=CentOS-7 - OpenStack libertybaseurl=http://mirrors.aliyun.com/centos/7/cloud/$basearch/openstack-liberty/gpgcheck=1enabled=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud[centos-openstack-liberty-test]name=CentOS-7 - OpenStack liberty Testingbaseurl=http://buildlogs.centos.org/centos/7/cloud/$basearch/openstack-liberty/gpgcheck=0enabled=0[root@controller yum.repos.d]# cat rdo-release.repo [openstack-liberty]name=OpenStack Liberty Repositorybaseurl=http://mirrors.aliyun.com/centos/7/cloud/x86_64/openstack-liberty/gpgcheck=1enabled=1gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud

升级系统

# yum upgrade

如果之前没有禁用SELinux，则安装 openstack-selinux 软件包,这个包会自动为openstack管理SELinux

# yum install -y openstack-selinux3.5 SQL数据库

大多数的openstack服务都是采用SQL数据库来存储数据，支持mysql和PostgreSQL，通常的做法是安装在 controller 节点上。这里数据库密码设置为 rootroot

[root@controller ~]# yum install mariadb mariadb-server MySQL-python[root@controller ~]# vim /etc/my.cnf.d/mariadb_openstack.cnf[mysqld]bind-address = 10.0.0.11default-storage-engine = innodbinnodb_file_per_tablecollation-server = utf8_general_ciinit-connect = 'SET NAMES utf8'character-set-server = utf8[root@controller ~]# systemctl enable mariadb.serviceCreated symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.[root@controller ~]# systemctl start mariadb.service3.6 NoSQL

部署了 Telemetry 服务才会需要NoSQL

本次不部署

3.7 消息队列

OpenStack 使用消息队列来协调操作和状态信息,通常的做法是安装在 controller 节点上，OpenStack支持的消息队列服务含 RabbitMQ, Qpid 和 ZeroMQ，然而大多数 OpenStack 服务模块都只支持某种特定的消息队列服务，这里选择 RabbitMQ，因为所有的 openstack 模块都支持它。

# yum install rabbitmq-server# systemctl enable rabbitmq-server.service# systemctl start rabbitmq-server.service

添加 openstack 用户:

# rabbitmqctl add_user openstack RABBIT_PASS Creating user "openstack" ...

授权用户 openstack 读、写、配置的权限

# rabbitmqctl set_permissions openstack ".*" ".*" ".*" Setting permissions for user "openstack" in vhost "/" ...四、认证服务（keystone）

keystone 安装在 controller 节点，为了提高服务性能，使用 apache 提供WEB请求，由 memcached 来保存 Token 信息

4.2 安装与配置

为keystone 建一个数据库
$ mysql -u root -pCREATE DATABASE keystone;GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' \ IDENTIFIED BY 'KEYSTONE_DBPASS';GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' \ IDENTIFIED BY 'KEYSTONE_DBPASS';
安装软件包
# yum install openstack-keystone httpd mod_wsgi \ memcached python-memcached# systemctl enable memcached.service# systemctl start memcached.service
配置 keystone
注意：不同版本号的keystone，其默认配置可能会有所不同
[DEFAULT]admin_token = ADMIN_TOKENverbose = True[database]connection = mysql://keystone:KEYSTONE_DBPASS@controller/keystone[memcache]servers = localhost:11211[token]provider = uuiddriver = memcache[revoke]driver = sql
初始化数据库
# su -s /bin/sh -c "keystone-manage db_sync" keystone
配置HTTP服务器
修改服务器名
# vim /etc/httpd/conf/httpd.confServerName controller
添加 keystone 的服务
# vim /etc/httpd/conf.d/wsgi-keystone.confListen 5000Listen 35357<VirtualHost *:5000> WSGIDaemonProcess keystone-public processes=5 threads=1 user=keystone group=keystone display-name=%{GROUP} WSGIProcessGroup keystone-public WSGIScriptAlias / /usr/bin/keystone-wsgi-public WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On <IfVersion >= 2.4> ErrorLogFormat "%{cu}t %M" </IfVersion> ErrorLog /var/log/httpd/keystone-error.log CustomLog /var/log/httpd/keystone-access.log combined <Directory /usr/bin> <IfVersion >= 2.4> Require all granted </IfVersion> <IfVersion < 2.4> Order allow,deny Allow from all </IfVersion> </Directory></VirtualHost><VirtualHost *:35357> WSGIDaemonProcess keystone-admin processes=5 threads=1 user=keystone group=keystone display-name=%{GROUP} WSGIProcessGroup keystone-admin WSGIScriptAlias / /usr/bin/keystone-wsgi-admin WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On <IfVersion >= 2.4> ErrorLogFormat "%{cu}t %M" </IfVersion> ErrorLog /var/log/httpd/keystone-error.log CustomLog /var/log/httpd/keystone-access.log combined <Directory /usr/bin> <IfVersion >= 2.4> Require all granted </IfVersion> <IfVersion < 2.4> Order allow,deny Allow from all </IfVersion> </Directory></VirtualHost>
启动HTTP服务器
# systemctl enable httpd.service# systemctl start httpd.service
验证
[root@controller ~]# ss -ntl | grep -E "5000|35357"LISTEN 0 128 :::35357 :::* LISTEN 0 128 :::5000 :::*

4.3 注册服务实体及API

配置环境变量
[root@controller ~]# vim admin.rcexport OS_TOKEN=ADMIN_TOKENexport OS_URL=http://controller:35357/v3export OS_IDENTITY_API_VERSION=3[root@controller ~]# source admin.rc
服务注册
[root@controller ~]# openstack service create \ --name keystone --description "OpenStack Identity" identity+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Identity || enabled | True || id | c9c8ca22d2a54c9fa1f3c77e1af7037d || name | keystone || type | identity |+-------------+----------------------------------+
API注册
openstack为每一服务提供三种API，admin、public、internal
[root@controller ~]# openstack endpoint create --region RegionOne \ identity public http://controller:5000/v2.0+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 866c0c3f786c4f8c8c34d47c00ef2851 || interface | public || region | RegionOne || region_id | RegionOne || service_id | c9c8ca22d2a54c9fa1f3c77e1af7037d || service_name | keystone || service_type | identity || url | http://controller:5000/v2.0 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ identity internal http://controller:5000/v2.0+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | e6893e1876ac4eca9e0de360c8ee71cc || interface | internal || region | RegionOne || region_id | RegionOne || service_id | c9c8ca22d2a54c9fa1f3c77e1af7037d || service_name | keystone || service_type | identity || url | http://controller:5000/v2.0 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ identity admin http://controller:35357/v2.0+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | b16d1443007b4d0cb126a354ec70c0f5 || interface | admin || region | RegionOne || region_id | RegionOne || service_id | c9c8ca22d2a54c9fa1f3c77e1af7037d || service_name | keystone || service_type | identity || url | http://controller:35357/v2.0 |+--------------+----------------------------------+

4.4 创建项目、用户及规则

创建 admin 项目
[root@controller ~]# openstack project create --domain default \ --description "Admin Project" admin+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | Admin Project || domain_id | default || enabled | True || id | 2e7ff30adaa74c1eacbfb6568e76a70c || is_domain | False || name | admin || parent_id | None |+-------------+----------------------------------+
创建 admin 用户
这里输入的密码是 openstack
[root@controller ~]# openstack user create --domain default \ --password-prompt adminUser Password:Repeat User Password:+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | default || enabled | True || id | 28927d1a28b34c09bf13413907a57b76 || name | admin |+-----------+----------------------------------+
创建 admin 规则
[root@controller ~]# openstack role create admin+-------+----------------------------------+| Field | Value |+-------+----------------------------------+| id | 62d1f3434ed746d580d771de68c0e459 || name | admin |+-------+----------------------------------+
把 admin 项目、admin 规则、admin 用户关联起来
[root@controller ~]# openstack role add --project admin --user admin admin
创建 service 项目
[root@controller ~]# openstack project create --domain default \ --description "Service Project" service+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | Service Project || domain_id | default || enabled | True || id | a794f7f642264b718023387f306f8d04 || is_domain | False || name | service || parent_id | None |+-------------+----------------------------------+
创建 demo 项目
[root@controller ~]# openstack project create --domain default \ --description "Demo Project" demo+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | Demo Project || domain_id | default || enabled | True || id | 9dad05492aa2462d83cbcb60fa4234c5 || is_domain | False || name | demo || parent_id | None |+-------------+----------------------------------+
创建 demo 用户
这里设置的密码也是 openstack
[root@controller ~]# openstack user create --domain default \ --password-prompt demoUser Password:Repeat User Password:+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | default || enabled | True || id | 1fa35f1441b64169a9c82176f6ca3b43 || name | demo |+-----------+----------------------------------+
创建 user 规则
[root@controller ~]# openstack role create user+-------+----------------------------------+| Field | Value |+-------+----------------------------------+| id | d41c2832666240aca1a020cb4753baf2 || name | user |+-------+----------------------------------+
把 demo 项目、user 规则、demo 用户关联起来
[root@controller ~]# openstack role add --project demo --user demo user

4.5 验证

出于安全考虑，修改配置
编辑 /usr/share/keystone/keystone-dist-paste.ini ,从 [pipeline:public_api] 、 [pipeline:admin_api] 和 [pipeline:api_v3] 这三部分内容中删除 admin_token_auth
为了验证，临时改环境变量
[root@controller ~]# unset OS_TOKEN OS_URL
为 admin 用户请求 token
[root@controller ~]# openstack --os-auth-url http://controller:35357/v3 \ --os-project-domain-id default --os-user-domain-id default \ --os-project-name admin --os-username admin --os-auth-type password \ token issuePassword: +------------+----------------------------------+| Field | Value |+------------+----------------------------------+| expires | 2016-08-29T01:48:02.212203Z || id | ebe202fdc5c84af180e89f1a9f67f7af || project_id | 2e7ff30adaa74c1eacbfb6568e76a70c || user_id | 28927d1a28b34c09bf13413907a57b76 |+------------+----------------------------------+

4.6 使用环境变量脚本

从上一节的验证部分可以发现，openstack 的命令有很多参数，如果每一次输入命令都要带上所有的参数，那就太麻烦了，解决此问题的方法就是使用环境变量，只要设置了相关的环境变量，输入命令时就可以省略相应的参数

创建 admin 用户的环境脚本
[root@controller ~]# vim admin-openrc.shexport OS_PROJECT_DOMAIN_ID=defaultexport OS_USER_DOMAIN_ID=defaultexport OS_PROJECT_NAME=adminexport OS_TENANT_NAME=adminexport OS_USERNAME=adminexport OS_PASSWORD=openstackexport OS_AUTH_URL=http://controller:35357/v3export OS_IDENTITY_API_VERSION=3
创建 demo 用户的环境脚本
[root@controller ~]# vim demo-openrc.shexport OS_PROJECT_DOMAIN_ID=defaultexport OS_USER_DOMAIN_ID=defaultexport OS_PROJECT_NAME=demoexport OS_TENANT_NAME=demoexport OS_USERNAME=demoexport OS_PASSWORD=openstackexport OS_AUTH_URL=http://controller:5000/v3export OS_IDENTITY_API_VERSION=3
使用脚本
[root@controller ~]# source admin-openrc.sh [root@controller ~]# openstack token issue+------------+----------------------------------+| Field | Value |+------------+----------------------------------+| expires | 2016-08-29T02:02:19.471758Z || id | 91890941cacd4e849197aeaff18d13fe || project_id | 2e7ff30adaa74c1eacbfb6568e76a70c || user_id | 28927d1a28b34c09bf13413907a57b76 |+------------+----------------------------------+

五、安装镜像服务(glance)

glance为用户提供虚拟机镜像的发现、注册和取回服务。

默认把镜像存放在 /var/lib/glance/images/ 目录下

5.1 环境准备

数据库准备
[root@controller ~]# mysql -u root -pCREATE DATABASE glance;GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \IDENTIFIED BY 'GLANCE_DBPASS';GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' \IDENTIFIED BY 'GLANCE_DBPASS';
使用 admin 权限
[root@controller ~]# source admin-openrc.sh
创建 glance 用户
密码设置为 openstack
[root@controller ~]# openstack user create --domain default --password-prompt glanceUser Password:Repeat User Password:+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | default || enabled | True || id | addd4b136dd848709a8510a7a51880c4 || name | glance |+-----------+----------------------------------+
把 service 项目、admin 规则、glance 用户关联起来
[root@controller ~]# openstack role add --project service --user glance admin
注册名为 image 的服务
[root@controller ~]# openstack service create --name glance \ --description "OpenStack Image service" image+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Image service || enabled | True || id | fbe45ebea79b49ef8dcf7ddb126e2da9 || name | glance || type | image |+-------------+----------------------------------+
注册API端点
[root@controller ~]# openstack endpoint create --region RegionOne \ image public http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 8f3c456c8a6b4697a79b649637438682 || interface | public || region | RegionOne || region_id | RegionOne || service_id | fbe45ebea79b49ef8dcf7ddb126e2da9 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ image internal http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | df2c31ab52c9447da812040c4feff203 || interface | internal || region | RegionOne || region_id | RegionOne || service_id | fbe45ebea79b49ef8dcf7ddb126e2da9 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ image admin http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | da36d20ff8964595b874112921d72eff || interface | admin || region | RegionOne || region_id | RegionOne || service_id | fbe45ebea79b49ef8dcf7ddb126e2da9 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+

5.2 安装与配置

安装程序包
[root@controller ~]# yum install openstack-glance python-glance python-glanceclient
编辑 /etc/glance/glance-api.conf
[DEFAULT]notification_driver = noopverbose = True[database]connection = mysql://glance:GLANCE_DBPASS@controller/glance[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = glancepassword = openstack[paste_deploy]flavor = keystone[glance_store]default_store = filefilesystem_store_datadir = /var/lib/glance/images/
编辑 /etc/glance/glance-registry.conf
[DEFAULT]notification_driver = noopverbose = True[database]connection = mysql://glance:GLANCE_DBPASS@controller/glance[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = glancepassword = openstack[paste_deploy]flavor = keystone
导入数据
[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glanceNo handlers could be found for logger "oslo_config.cfg"
这个错误可以忽略

5.3 完成安装 # systemctl enable openstack-glance-api.service \ openstack-glance-registry.service # systemctl start openstack-glance-api.service \ openstack-glance-registry.service5.4 验证

我们使用一个非常小的系统镜像来验证 glance 是否成功部署

修改环境变量脚本
# echo "export OS_IMAGE_API_VERSION=2" \ | tee -a admin-openrc.sh demo-openrc.sh
使用 admin 权限
# source admin-openrc.sh
下载镜像
# wget http://download.cirros-cloud.net ... 3.4-x86_64-disk.img
如果上面的镜像访问不了，可以使用下面这个
https://launchpadlibrarian.net/83305348/cirros-0.3.0-x86_64-disk.img
上传镜像给 glance
[root@controller ~]# glance image-create --name "cirros" \ --file cirros-0.3.4-x86_64-disk.img \ --disk-format qcow2 --container-format bare \ --visibility public --progress[=============================>] 100%+------------------+--------------------------------------+| Property | Value |+------------------+--------------------------------------+| checksum | b085f55ed9f8dde416520d901b23ac4d || container_format | bare || created_at | 2016-08-29T02:45:11Z || disk_format | qcow2 || id | 2569f637-f41c-4747-8f53-fa6a687840c7 || min_disk | 0 || min_ram | 0 || name | cirros || owner | 2e7ff30adaa74c1eacbfb6568e76a70c || protected | False || size | 16384 || status | active || tags | [] || updated_at | 2016-08-29T02:45:12Z || virtual_size | None || visibility | public |+------------------+--------------------------------------+
查看已上传的镜像
[root@controller ~]# glance image-list+--------------------------------------+--------+| ID | Name |+--------------------------------------+--------+| 2569f637-f41c-4747-8f53-fa6a687840c7 | cirros |+--------------------------------------+--------+

六、安装计算服务(nova)6.1 安装及配置控制节点(controller)

这一部分讲述的是 nova 在控制节点（compute）上的部署

创建数据库
[root@controller ~]# mysql -u root -pCREATE DATABASE nova;GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' \ IDENTIFIED BY 'NOVA_DBPASS';GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' \ IDENTIFIED BY 'NOVA_DBPASS';
使用 admin 用户权限
[root@controller ~]# source admin-openrc.sh
创建 nova 用户
这里密码设为： openstack
[root@controller ~]# openstack user create --domain default --password-prompt novaUser Password:Repeat User Password:+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | default || enabled | True || id | d51a6e818f4746028b67bbe8d04c2436 || name | nova |+-----------+----------------------------------+
添加规则
[root@controller ~]# openstack role add --project service --user nova admin
创建服务
[root@controller ~]# openstack service create --name nova \ --description "OpenStack Compute" compute+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Compute || enabled | True || id | 982dd382eacc434cafb2f18626e40e47 || name | nova || type | compute |+-------------+----------------------------------+
注册API
[root@controller ~]# openstack endpoint create --region RegionOne \ compute public http://controller:8774/v2/%$tenant_id$s+--------------+-----------------------------------------+| Field | Value |+--------------+-----------------------------------------+| enabled | True || id | cc57d697e613465980060e3fa3499908 || interface | public || region | RegionOne || region_id | RegionOne || service_id | 982dd382eacc434cafb2f18626e40e47 || service_name | nova || service_type | compute || url | http://controller:8774/v2/%(tenant_id)s |+--------------+-----------------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ compute internal http://controller:8774/v2/%$tenant_id$s+--------------+-----------------------------------------+| Field | Value |+--------------+-----------------------------------------+| enabled | True || id | 04f6ad7243e74f86b315a95e210a9c96 || interface | internal || region | RegionOne || region_id | RegionOne || service_id | 982dd382eacc434cafb2f18626e40e47 || service_name | nova || service_type | compute || url | http://controller:8774/v2/%(tenant_id)s |+--------------+-----------------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ compute admin http://controller:8774/v2/%$tenant_id$s+--------------+-----------------------------------------+| Field | Value |+--------------+-----------------------------------------+| enabled | True || id | ebced03a21d94259801222520503033c || interface | admin || region | RegionOne || region_id | RegionOne || service_id | 982dd382eacc434cafb2f18626e40e47 || service_name | nova || service_type | compute || url | http://controller:8774/v2/%(tenant_id)s |+--------------+-----------------------------------------+
安装以及配置组件
[root@controller ~]# yum install openstack-nova-api openstack-nova-cert \ openstack-nova-conductor openstack-nova-console \ openstack-nova-novncproxy openstack-nova-scheduler \ python-novaclient
编辑 /etc/nova/nova.conf
[DEFAULT]network_api_class = nova.network.neutronv2.api.APIsecurity_group_api = neutronlinuxnet_interface_driver = nova.network.linux_net.NeutronLinuxBridgeInterfaceDriverfirewall_driver = nova.virt.firewall.NoopFirewallDriverrpc_backend = rabbitauth_strategy = keystonemy_ip = 10.0.0.11enabled_apis=osapi_compute,metadataverbose = True[oslo_messaging_rabbit]rabbit_host = controllerrabbit_userid = openstackrabbit_password = RABBIT_PASS[database]connection = mysql://nova:NOVA_DBPASS@controller/nova[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = novapassword = openstack #NOVA_PASS[vnc]vncserver_listen = $my_ipvncserver_proxyclient_address = $my_ip[glance]host = controller[oslo_concurrency]lock_path = /var/lib/nova/tmp
数据导入
[root@controller ~]# su -s /bin/sh -c "nova-manage db sync" novaNo handlers could be found for logger "oslo_config.cfg"
完成安装
# systemctl enable openstack-nova-api.service \ openstack-nova-cert.service openstack-nova-consoleauth.service \ openstack-nova-scheduler.service openstack-nova-conductor.service \ openstack-nova-novncproxy.service# systemctl start openstack-nova-api.service \ openstack-nova-cert.service openstack-nova-consoleauth.service \ openstack-nova-scheduler.service openstack-nova-conductor.service \ openstack-nova-novncproxy.service

6.2 安装及配置计算节点(compute)

这一部分讲述的是 nova 在计算节点（compute）上的部署

安装
[root@compute1 ~]# yum install openstack-nova-compute sysfsutils
编辑 /etc/nova/nova.conf
[DEFAULT]rpc_backend = rabbitauth_strategy = keystonemy_ip = 10.0.0.31network_api_class = nova.network.neutronv2.api.APIsecurity_group_api = neutronlinuxnet_interface_driver = nova.network.linux_net.NeutronLinuxBridgeInterfaceDriverfirewall_driver = nova.virt.firewall.NoopFirewallDriververbose = True[oslo_messaging_rabbit]rabbit_host = controllerrabbit_userid = openstackrabbit_password = RABBIT_PASS[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = novapassword = openstack[vnc]enabled = Truevncserver_listen = 0.0.0.0vncserver_proxyclient_address = $my_ipnovncproxy_base_url = http://controller:6080/vnc_auto.html[glance]host = controller[oslo_concurrency]lock_path = /var/lib/nova/tmp
检查服务器是否支持硬件虚拟化
[root@compute1 ~]# egrep -c '(vmx|svm)' /proc/cpuinfo1
如果显示的数字是0，则表示不支持硬件虚拟化，需要设置服务器使支持，或者使用qemu，方法如下
[root@compute1 ~]# vim /etc/nova/nova.conf[libvirt]virt_type = qemu
完成安装
[root@compute1 ~]# systemctl enable libvirtd.service openstack-nova-compute.service[root@compute1 ~]# systemctl start libvirtd.service openstack-nova-compute.service
验证
拉取环境变量配置脚本
[root@compute1 ~]# scp controller:~/*openrc.sh .root@controller's password: admin-openrc.sh                                                                   100%  289    0.3KB/s 00:00 demo-openrc.sh                                                                   100%  285    0.3KB/s 00:00
使用环境变量
[root@compute1 ~]# source admin-openrc.sh
查看 nova 服务组件
[root@compute1 ~]# nova service-list+----+------------------+------------+----------+---------+-------+----------------------------+-----------------+| Id | Binary          | Host    | Zone    | Status  | State | Updated_at                | Disabled Reason |+----+------------------+------------+----------+---------+-------+----------------------------+-----------------+| 1  | nova-conductor | controller | internal | enabled | up | 2016-08-29T06:29:36.000000 | -             || 2  | nova-consoleauth | controller | internal | enabled | up | 2016-08-29T06:29:36.000000 | -             || 3  | nova-cert       | controller | internal | enabled | up | 2016-08-29T06:29:37.000000 | -             || 4  | nova-scheduler | controller | internal | enabled | up | 2016-08-29T06:29:37.000000 | -             || 5  | nova-compute    | compute1 | nova    | enabled | up | 2016-08-29T06:29:41.000000 | -             |+----+------------------+------------+----------+---------+-------+----------------------------+-----------------+
查看API端点（可以忽 WARNING 级别的信息）
[root@compute1 ~]# nova endpointsWARNING: nova has no endpoint in ! Available endpoints for this service:+-----------+------------------------------------------------------------+| nova    | Value                                                    |+-----------+------------------------------------------------------------+| id       | 04f6ad7243e74f86b315a95e210a9c96                         || interface | internal                                                 || region | RegionOne                                                 || region_id | RegionOne                                                 || url    | http://controller:8774/v2/2e7ff30adaa74c1eacbfb6568e76a70c |+-----------+------------------------------------------------------------++-----------+------------------------------------------------------------+| nova    | Value                                                    |+-----------+------------------------------------------------------------+| id       | cc57d697e613465980060e3fa3499908                         || interface | public                                                    || region | RegionOne                                                 || region_id | RegionOne                                                 || url    | http://controller:8774/v2/2e7ff30adaa74c1eacbfb6568e76a70c |+-----------+------------------------------------------------------------++-----------+------------------------------------------------------------+| nova    | Value                                                    |+-----------+------------------------------------------------------------+| id       | ebced03a21d94259801222520503033c                         || interface | admin                                                    || region | RegionOne                                                 || region_id | RegionOne                                                 || url    | http://controller:8774/v2/2e7ff30adaa74c1eacbfb6568e76a70c |+-----------+------------------------------------------------------------+WARNING: keystone has no endpoint in ! Available endpoints for this service:+-----------+----------------------------------+| keystone  | Value                         |+-----------+----------------------------------+| id       | 866c0c3f786c4f8c8c34d47c00ef2851 || interface | public                         || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:5000/v2.0    |+-----------+----------------------------------++-----------+----------------------------------+| keystone  | Value                         |+-----------+----------------------------------+| id       | b16d1443007b4d0cb126a354ec70c0f5 || interface | admin                         || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:35357/v2.0    |+-----------+----------------------------------++-----------+----------------------------------+| keystone  | Value                         |+-----------+----------------------------------+| id       | e6893e1876ac4eca9e0de360c8ee71cc || interface | internal                      || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:5000/v2.0    |+-----------+----------------------------------+WARNING: glance has no endpoint in ! Available endpoints for this service:+-----------+----------------------------------+| glance | Value                         |+-----------+----------------------------------+| id       | 8f3c456c8a6b4697a79b649637438682 || interface | public                         || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:9292          |+-----------+----------------------------------++-----------+----------------------------------+| glance | Value                         |+-----------+----------------------------------+| id       | da36d20ff8964595b874112921d72eff || interface | admin                         || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:9292          |+-----------+----------------------------------++-----------+----------------------------------+| glance | Value                         |+-----------+----------------------------------+| id       | df2c31ab52c9447da812040c4feff203 || interface | internal                      || region | RegionOne                      || region_id | RegionOne                      || url    | http://controller:9292          |+-----------+----------------------------------+
查看镜像
[root@compute1 ~]# nova image-list+--------------------------------------+--------+--------+--------+| ID                                  | Name | Status | Server |+--------------------------------------+--------+--------+--------+| 2569f637-f41c-4747-8f53-fa6a687840c7 | cirros | ACTIVE |       |+--------------------------------------+--------+--------+--------+

七、安装网络组件（neutron）7.1 安装及配置 controller 节点

数据库
# mysql -u root -pCREATE DATABASE neutron;GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' \ IDENTIFIED BY 'NEUTRON_DBPASS';GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' \ IDENTIFIED BY 'NEUTRON_DBPASS';
使用 admin 权限
[root@controller ~]# source admin-openrc.sh
创建服务凭证
创建 neutron 用户，这里密码设置为: openstack
[root@controller ~]# openstack user create --domain default --password-prompt neutronUser Password:Repeat User Password:+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | default || enabled | True || id | 26c2d483816443c69ebd68a2a0f7661f || name | neutron |+-----------+----------------------------------+
添加规则
[root@controller ~]# openstack role add --project service --user neutron admin
注册 neutron 服务
[root@controller ~]# openstack service create --name neutron \ --description "OpenStack Networking" network+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Networking || enabled | True || id | 7fe502d073214afda58b7b250ae9e962 || name | neutron || type | network |+-------------+----------------------------------+
创建API
[root@controller ~]# openstack endpoint create --region RegionOne \ network public http://controller:9696+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | b3c540fa5b54492cba3dd1f79b3bd51c || interface | public || region | RegionOne || region_id | RegionOne || service_id | 7fe502d073214afda58b7b250ae9e962 || service_name | neutron || service_type | network || url | http://controller:9696 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ network internal http://controller:9696+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | fa2a872165b54ce3ad453a733dbafb7b || interface | internal || region | RegionOne || region_id | RegionOne || service_id | 7fe502d073214afda58b7b250ae9e962 || service_name | neutron || service_type | network || url | http://controller:9696 |+--------------+----------------------------------+[root@controller ~]# openstack endpoint create --region RegionOne \ network admin http://controller:9696+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 64b2d00beda044099dfa90bc0feac9b5 || interface | admin || region | RegionOne || region_id | RegionOne || service_id | 7fe502d073214afda58b7b250ae9e962 || service_name | neutron || service_type | network || url | http://controller:9696 |+--------------+----------------------------------+
配置网络
根据使用场景的不同，网络配置分两种类型
1: Provider networks #这种最简单，下面的安装步骤就基于这种类型2: Self-service networks
安装相关组件
[root@controller ~]# yum install openstack-neutron openstack-neutron-ml2 \ openstack-neutron-linuxbridge python-neutronclient ebtables ipset
配置 neutron 服务端组件
服务端组件配置包含数据库、认证、消息队列、拓朴变化通知、插件
编辑 /etc/neutron/neutron.conf
[DEFAULT]core_plugin = ml2service_plugins =rpc_backend = rabbitauth_strategy = keystonenotify_nova_on_port_status_changes = Truenotify_nova_on_port_data_changes = Truenova_url = http://controller:8774/v2verbose = True[database]connection = mysql://neutron:NEUTRON_DBPASS@controller/neutron[oslo_messaging_rabbit]rabbit_host = controllerrabbit_userid = openstackrabbit_password = RABBIT_PASS[oslo_concurrency]lock_path = /var/lib/neutron/tmp[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = neutronpassword = openstack[nova]auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultregion_name = RegionOneproject_name = serviceusername = novapassword = openstack
配置 ML2 plug-in
编辑 /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]# 注意：启用ML2后，如果删除了type_drivers的值将导致数据库异常type_drivers = flat,vlantenant_network_types =mechanism_drivers = linuxbridgeextension_drivers = port_security[ml2_type_flat]flat_networks = public[securitygroup]enable_ipset = True
配置 Linux bridge agent
编辑 /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]physical_interface_mappings = public:eno16777736[vxlan]enable_vxlan = False[agent]prevent_arp_spoofing = True[securitygroup]enable_security_group = Truefirewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
配置 DHCP Agent
编辑 /etc/neutron/dhcp_agent.ini
[DEFAULT]interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriverdhcp_driver = neutron.agent.linux.dhcp.Dnsmasqenable_isolated_metadata = Trueverbose = True
配置 metadata agent
编辑 /etc/neutron/metadata_agent.ini
[DEFAULT]auth_uri = http://controller:5000auth_url = http://controller:35357auth_region = RegionOneauth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = neutronpassword = openstacknova_metadata_ip = controllermetadata_proxy_shared_secret = METADATA_SECRETverbose = True
配置 nova 使 compute 节点可以使用网络
编辑 /etc/nova/nova.conf
[neutron]url = http://controller:9696auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultregion_name = RegionOneproject_name = serviceusername = neutronpassword = openstackservice_metadata_proxy = Truemetadata_proxy_shared_secret = METADATA_SECRET
完成安装
建立链接
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
同步数据
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf \ --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron
重启 nova-api 服务
[root@controller ~]# systemctl restart openstack-nova-api.service
启动及配置开机启动
[root@controller ~]# systemctl enable neutron-server.service \ neutron-linuxbridge-agent.service neutron-dhcp-agent.service \ neutron-metadata-agent.service[root@controller ~]# systemctl start neutron-server.service \ neutron-linuxbridge-agent.service neutron-dhcp-agent.service \ neutron-metadata-agent.service

7.2 安装及配置 compute 节点

组件安装
# yum install openstack-neutron openstack-neutron-linuxbridge ebtables ipset
公共组件配置
网络公共组件配置包含认证、消息队列和插件
编辑 /etc/neutron/neutron.conf
[DEFAULT]rpc_backend = rabbitauth_strategy = keystoneverbose = True[oslo_messaging_rabbit]rabbit_host = controllerrabbit_userid = openstackrabbit_password = RABBIT_PASS[oslo_concurrency]lock_path = /var/lib/neutron/tmp[database]# 注释掉该模块的所有配置，因不需要 compute 节点直接连接数据库[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultproject_name = serviceusername = neutronpassword = openstack
配置网络选项
根据网络类型不同，compute节点也有两种配置方法，要和controller节点一样
1: Provider networks #我们的选择2: Self-service networks
配置 Linux bridge agent
编辑 /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]physical_interface_mappings = public:eno16777736[vxlan]enable_vxlan = False[agent]prevent_arp_spoofing = True[securitygroup]enable_security_group = Truefirewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
配置compute节点使用网络
编辑 /etc/nova/nova.conf
[neutron]url = http://controller:9696auth_url = http://controller:35357auth_plugin = passwordproject_domain_id = defaultuser_domain_id = defaultregion_name = RegionOneproject_name = serviceusername = neutronpassword = openstack
完成安装
重启 compute 服务
[root@compute1 ~]# systemctl restart openstack-nova-compute.service
启动 Linux bridge agent 并设置开机自启动
[root@compute1 ~]# systemctl enable neutron-linuxbridge-agent.service[root@compute1 ~]# systemctl start neutron-linuxbridge-agent.service

7.3 验证

以下命令在controller节点上执行

下面这个应该能看到4个agent,3个在controller节点，1个在compute1节点

八、控制面板（horizon）

基于WEB的管理界面，用来管理openstack，通过API交互。一般安装在 controller 节点上。

安装程序
[root@controller ~]# yum install openstack-dashboard
编辑 /etc/openstack-dashboard/local_settings
OPENSTACK_HOST = "controller"ALLOWED_HOSTS = ['*', ]CACHES = { 'default': { 'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache', 'LOCATION': '127.0.0.1:11211', }}OPENSTACK_KEYSTONE_DEFAULT_ROLE = "user"OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = TrueOPENSTACK_API_VERSIONS = { "identity": 3, "volume": 2,}OPENSTACK_NEUTRON_NETWORK = { ... 'enable_router': False, 'enable_quotas': False, 'enable_distributed_router': False, 'enable_ha_router': False, 'enable_lb': False, 'enable_firewall': False, 'enable_vpn': False, 'enable_fip_topology_check': False,}#时区设置TIME_ZONE = "UTC"
完成安装
[root@controller ~]# systemctl enable httpd.service memcached.service[root@controller ~]# systemctl restart httpd.service memcached.service
验证
用浏览器打开：http://controller/dashboard
域： default
用户： admin 或 demon

九、启动虚拟机实例

9.1 创建虚拟网络

9.1.1 使用 admin 权限

[root@controller ~]# source admin-openrc.sh

9.1.2 创建共享网络

[root@controller ~]# neutron net-create public --shared --provider:physical_network public \ --provider:network_type flatCreated a new network:+---------------------------+--------------------------------------+| Field | Value |+---------------------------+--------------------------------------+| admin_state_up | True || id | 5be95c56-3ce8-4f97-84dd-283652e7c995 || mtu | 0 || name | public || port_security_enabled | True || provider:network_type | flat || provider:physical_network | public || provider:segmentation_id | || router:external | False || shared | True || status | ACTIVE || subnets | || tenant_id | 2e7ff30adaa74c1eacbfb6568e76a70c |+---------------------------+--------------------------------------+

--shared 表示允许所有的项目使用该网络

9.1.3 创建子网

[root@controller ~]# neutron subnet-create public 192.168.100.0/24 --name public \ --allocation-pool start=192.168.100.50,end=192.168.100.99\ --dns-nameserver 211.162.66.66 --gateway 192.168.100.2Created a new subnet:+-------------------+------------------------------------------------------+| Field | Value |+-------------------+------------------------------------------------------+| allocation_pools | {"start": "192.168.100.50", "end": "192.168.100.99"} || cidr | 192.168.100.0/24 || dns_nameservers | 211.162.66.66 || enable_dhcp | True || gateway_ip | 192.168.100.2 || host_routes | || id | 14982f32-9365-4931-ad55-be6b82361ae4 || ip_version | 4 || ipv6_address_mode | || ipv6_ra_mode | || name | public || network_id | 5be95c56-3ce8-4f97-84dd-283652e7c995 || subnetpool_id | || tenant_id | 2e7ff30adaa74c1eacbfb6568e76a70c |+-------------------+------------------------------------------------------+9.2 生成密钥对

9.2.1 使用 demo 权限

[root@controller ~]# source demo-openrc.sh

9.2.2 生成密钥对

如果已有密钥，则可以不使用 ssh-keygen 重新生成

[root@controller ~]# ssh-keygen -q -N ""Enter file in which to save the key (/root/.ssh/id_rsa): [root@controller ~]# nova keypair-add --pub-key ~/.ssh/id_rsa.pub mykey

9.2.3 查看有哪些可用的密钥

[root@controller ~]# nova keypair-list+-------+-------------------------------------------------+| Name | Fingerprint |+-------+-------------------------------------------------+| mykey | f1:78:45:e2:a8:70:dc:cd:53:c1:69:04:26:df:97:96 |+-------+-------------------------------------------------+9.3 添加安全规则组

默认情况下，安全规则组 default 会应用到所有的实例当中，它会通过防火墙规则来拒绝所有的远程访问。一般来说，我们通常会放行 ICMP 和 SSH 这两种协议的访问。

9.3.1 放行 ICMP 协议

[root@controller ~]# nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0+-------------+-----------+---------+-----------+--------------+| IP Protocol | From Port | To Port | IP Range | Source Group |+-------------+-----------+---------+-----------+--------------+| icmp | -1 | -1 | 0.0.0.0/0 | |+-------------+-----------+---------+-----------+--------------+

9.3.2 放行 SSH 协议

[root@controller ~]# nova secgroup-add-rule default tcp 22 22 0.0.0.0/0+-------------+-----------+---------+-----------+--------------+| IP Protocol | From Port | To Port | IP Range | Source Group |+-------------+-----------+---------+-----------+--------------+| tcp | 22 | 22 | 0.0.0.0/0 | |+-------------+-----------+---------+-----------+--------------+9.4 启动虚拟机实例

9.4.1 确定创建虚拟机实例所需要的相关组件及参数

使用 demo 权限
[root@controller ~]# source demo-openrc.sh
查看预定义虚拟机硬件配置
[root@controller ~]# nova flavor-list+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True || 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True || 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True || 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True || 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
在这里我们将选择 m1.tiny
查看可用镜像
[root@controller ~]# nova image-list+--------------------------------------+--------+--------+--------+| ID | Name | Status | Server |+--------------------------------------+--------+--------+--------+| 2569f637-f41c-4747-8f53-fa6a687840c7 | cirros | ACTIVE | |+--------------------------------------+--------+--------+--------+
查看可用的网络
[root@controller ~]# neutron net-list+--------------------------------------+--------+-------------------------------------------------------+| id | name | subnets |+--------------------------------------+--------+-------------------------------------------------------+| 5be95c56-3ce8-4f97-84dd-283652e7c995 | public | 14982f32-9365-4931-ad55-be6b82361ae4 192.168.100.0/24 |+--------------------------------------+--------+-------------------------------------------------------+
这是之前我们创建的 public 网络,但必须使用 id 来调用网络

9.4.2 启动实例

[root@controller ~]# nova boot --flavor m1.tiny --image cirros --nic net-id=5be95c56-3ce8-4f97-84dd-283652e7c995 \ --security-group default --key-name mykey public-instance+--------------------------------------+-----------------------------------------------+| Property | Value |+--------------------------------------+-----------------------------------------------+| OS-DCF:diskConfig | MANUAL || OS-EXT-AZ:availability_zone | || OS-EXT-STS:power_state | 0 || OS-EXT-STS:task_state | scheduling || OS-EXT-STS:vm_state | building || OS-SRV-USG:launched_at | - || OS-SRV-USG:terminated_at | - || accessIPv4 | || accessIPv6 | || adminPass | Lps33tUD5Rwz || config_drive | || created | 2016-08-30T05:03:21Z || flavor | m1.tiny (1) || hostId | || id | faad8a82-acf6-454a-80ea-366ce42986c4 || image | cirros (2569f637-f41c-4747-8f53-fa6a687840c7) || key_name | mykey || metadata | {} || name | public-instance || os-extended-volumes:volumes_attached | [] || progress | 0 || security_groups | default || status | BUILD || tenant_id | 9dad05492aa2462d83cbcb60fa4234c5 || updated | 2016-08-30T05:03:21Z || user_id | 1fa35f1441b64169a9c82176f6ca3b43 |+--------------------------------------+-----------------------------------------------+

命令里的 5be95c56-3ce8-4f97-84dd-283652e7c995 就是之前通过 neutron net-list 查询到的网络ID

9.4.3 查看实例状态

实例启动完成后，状态会由 BUILD 变为 ACTIVE

9.5 通过虚拟控制台访问实例

9.5.1 通过浏览器访问VNC

[root@controller ~]# nova get-vnc-console public-instance novnc+-------+---------------------------------------------------------------------------------+| Type | Url |+-------+---------------------------------------------------------------------------------+| novnc | http://controller:6080/vnc_auto.html?token=54f74d29-43bd-4928-96a7-28ae19617ae2 |+-------+---------------------------------------------------------------------------------+

如果浏览器所在的主机不能解析 controller 则可以替换成IP地址

9.5.2 SSH登录测试

[root@controller ~]# ssh cirros@192.168.100.52The authenticity of host '192.168.100.52 (192.168.100.52)' can't be established.RSA key fingerprint is 43:5c:b8:69:46:d4:70:ef:7e:79:8b:b2:4a:11:02:e6.Are you sure you want to continue connecting (yes/no)? yesWarning: Permanently added '192.168.100.52' (RSA) to the list of known hosts.cirros@192.168.100.52's password: $ $ ls$ pwd/home/cirros$ cat /etc/issuelogin as 'cirros' user. default password: 'cubswin

'. use 'sudo' for root.$

默认用户 cirros ，密码 cubswin

===================

1.官方镜像下载： http://docs.openstack.org/image-guide/obtain-images.html

2. 快照功能： 做快照会把实例关闭的，然后再快照生成镜像，快照完成后不会自动启动实例

3. 软重启和硬重启： 软重启是正常的通知系统启动系统；硬重启是直接断电，再启动系统。

摘自：http://www.infocool.net/kb/OpenStack/201609/187078.html
在 CentOS7.2 上安装 OpenStack Liberty 版

		自动登录	找回密码
密码			立即注册

在 CentOS7.2 上安装 OpenStack Liberty 版

浏览过的版块

优秀会员

助人为乐

辛勤工作

技术精英

多才多艺

优秀班竹

灌水天才

星球管理

宣传大使

灌水之王

财富勋章

版主勋章

动漫勋章

勤奋会员

论坛精英

PS高手

心

8

闪游皮肤

双鱼座

8★8➹

志愿者

乖