Auto Install with Kickstart

jedy

   

• Copy install files of redhat
  
• Setup NFS server
  
       
  
  • Related files
    
  • Setting
    
  • Start
    
  • Usage
    
     
  
• Kickstart config file
  
       
  
  • File
    
  • Note
    
     
  
• DHCP
  
• PXE
  
       
  
  • Set bios for DELL
    
  • set tftp server
    
  • set boot item
    
     
  
• More Scripts
  
       
  
  • boot.msg
    
  • pxelinux.cfg/default
    
  • ks.cfg
    
  • ks_more.cfg
    
  • mysql.sh
    
  • qmail.sh
    
  • set.sh
    
  
  

Copy install files of redhat

mkdir /misc/redhat  insert each install CD of RedHat

mount /dev/cdrom /mnt/cdrom  if CD1

cp -var /mnt/cdrom/. /misc/redhat  other CDs

cp -var /mnt/cdrom/RedHat /misc/redhat umount /mnt/cdrom eject  Setup NFS server

Related files

/etc/exports -- config file
/usr/sbin/exportfs
/usr/sbin/showmount --  check
/var/lib/nfs/xtab -- log

Setting

echo "/mis/redhat 192.168.2.0/24(ro,no_root_squash)" >> /etc/exports  ro -- readonly
no_root_squash -- every user on remote is nobody except  root

Start

service portmap start
service nfs start

Usage

mount –t nfs -o soft,intr,timeout=30 192.168.2.119:/usr/home /usr/home/  

   

• timeo=n
  

This sets the time (in tenths of a second) the NFS client will wait for a  request to complete. The default value is 7 (0.7 seconds). What happens after a  timeout depends on whether you use the hard or soft option.

   

• soft
  

Soft-mount (as opposed to hard-mount) the driver. This option causes an I/O  error to be reported to the process attempting a file operation when a major  timeout occurs.

   

• intr
  

Allow signals to interrupt an NFS call. Useful for aborting when the server  doesn't respond.

Kickstart config file

File

ks.cfg content:

#Generated by Kickstart Configurator
#System language
lang en_US
#Language modules to install
langsupport zh_CN.GB2312 zh_TW.Big5 ja_JP.eucJP --default=en_US
#System keyboard
keyboard us
#System mouse
mouse generic3ps/2
#Sytem timezone
timezone Asia/Tokyo
#Root password rootpw --iscrypted $1$yifNoGyM$fq2lHrrfGIEyvglxnSuZ0.
#Reboot after installation
reboot
#Use text mode install
text
#Install Red Hat Linux instead of upgrade
install
#Use NFS installation Media
nfs --server=192.168.2.119 --dir=/misc/redhat/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext3 --size 5000 --asprimary
part /boot --fstype ext3 --size 100 --asprimary
part swap --size 1024 --asprimary
part /home --fstype ext3 --size 5000
part /usr --fstype ext3 --size 5000 --asprimary
part /var --fstype ext3 --size 1 --grow
#System authorization infomation
auth  --useshadow  --enablemd5
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure XWindows
skipx
#Package install information
%packages --resolvedeps
@ Development Tools
ntp  

%post
#!/bin/bash
if [ -e /etc/ntp.conf ]; then
mv /etc/ntp.conf /etc/ntp.conf.bak
fi
echo "server dns5.sakura.ad.jp
driftfile /etc/ntp/drift
broadcastdelay 0.008" > /etc/ntp.conf
chkconfig --level 3 ntpd on  copy to NFS directory

cp ks.cfg /misc/redhat  enter the following command at the boot: prompt:

linux ks=nfs:192.168.2.119:/misc/redhat/ks.cfg  Note

When installing, it has following message:

Could not allocate requested partitions Partitioning failed:
Could not allocate partitions Press OK to reboot your system   Maybe partitions are too large.

DHCP

Append this to /etc/dhcp.conf

allow booting;
allow bootp;
class "pxeclients" {
match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
next-server <server-ip>;   
filename "linux-install/pxelinux.0";
}  Then

service dhcpd restart  server-ip is tftp server's ip, e.g. 192.168.2.119

PXE

Set bios for DELL

Selecting MBA UNDI allows the system to boot from the network server. The MBA  UNDI option appears under Boot Sequence only if the Network Interface Controller  option is set to On w/MBA. If the Network Interface Controller option is set to  On or Off, set it to On w/MBA and then press <Alt><b> to save the  change and reboot the system. MBA UNDI then appears under Boot Sequence.

set tftp server

/sbin/chkconfig --level 345 xinetd on
/sbin/chkconfig --level 345 tftp on
mkdir /tftpboot/linux-install
cd /tftpboot/linux-install
cp /usr/lib/syslinux/pxelinux.0 ./
# directory image and isolinux are on CD1 of redhat install CDs
cp /mnt/cdrom/image/pxeboot/initr.img ./
cp /mnt/cdrom/image/pxeboot/vmlinux ./
mkdir pxelinux.cfg
cp /mnt/cdrom/isolinux/isolinux.cfg ./pxelinux.cfg/default
cp /mnt/cdrom/isolinux/*.msg ./  set boot item

Add this into boot.msg

-  To auto install Red Hat Enterprise Linux, type:     autoinstall <ENTER>.  Add this into default.

label autoinstall   kernel vmlinuz   append ks=nfs:192.168.2.119:/misc/redhat/ks.cfg initrd=initrd.img  Then at the "boot:" prompt type "autointall".

More Scripts

Using these scripts to choose to install MySQL and qmail.

boot.msg

splash.lss   -  To install or upgrade Red Hat Enterprise Linux in graphical mode,      press the <ENTER> key.   -  To install or upgrade Red Hat Enterprise Linux in text mode, type:      linux text <ENTER>.    -  To install Red Hat Enterprise Linux only, type:      base <ENTER>.   -  To install Red Hat Enterprise Linux, MySQL and qmail, type:     install <ENTER>.   -  Use the function keys listed below for more information.  [F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]   pxelinux.cfg/default

default bse
prompt 1 timeout 300
display boot.msg
F1 boot.msg
F2 options.msg
F3 general.msg
F4 param.msg
F5 rescue.msg
F7 snake.msg
label linux
kernel vmlinuz
append initrd=initrd.img
label text  
kernel vmlinuz
append initrd=initrd.img text
label expert
kernel vmlinuz
append expert initrd=initrd.img
label ks
kernel vmlinuz
append ks initrd=initrd.img
label lowres
kernel vmlinuz
append initrd=initrd.img lowres
label base
kernel vmlinuz
append ks=nfs:192.168.1.1:/misc/redhat/ks.cfg initrd=initrd.img
label install
kernel vmlinuz
append ks=nfs:192.168.1.1:/misc/redhat/ks_more.cfg initrd=initrd.img   ks.cfg

# kickstart auto install config
# Author : Wu Hao
# Date   : 2005/08/24
#System  language
lang en_US
#Language modules to install
langsupport zh_CN.GB2312 zh_TW.Big5 ja_JP.eucJP --default=en_US
#System keyboard
keyboard us
#System mouse
mouse generic3ps/2
#Sytem timezone
timezone Asia/Tokyo
#Root password
rootpw --iscrypted $1$yifNoGyM$fq2lHrrfGIEyvglxnSuZ0.
#Reboot after installation
reboot
#Use text mode install
text
#Install Red Hat Linux instead of upgrade
install
#Use NFS installation Media
nfs --server=192.168.1.1 --dir=/misc/redhat/
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all --initlabel
#Disk partitioning information
part / --fstype ext3 --size 5000 --asprimary
part /boot --fstype ext3 --size 100 --asprimary
part swap --size 1024 --asprimary
#part /home --fstype ext3 --size 5000
#part /usr --fstype ext3 --size 5000 --asprimary
part /var --fstype ext3 --size 1 --grow
#System authorization infomation
auth  --useshadow  --enablemd5
#Network information
network --bootproto=dhcp --device=eth0
#Firewall configuration
firewall --disabled
#Do not configure XWindows skipx
#Package install information
%packages --resolvedeps
@ Development Tools
ntp
%post --nochroot
#!/bin/bash
SOURCE_DIR=/mnt/source/others
TARGET_DIR=/mnt/sysimage/usr/src
R_TARGET_DIR=/usr/src
mkdir -p $TARGET_DIR  
#set
cp $SOURCE_DIR/set.sh $TARGET_DIR
chroot /mnt/sysimage/ $R_TARGET_DIR/set.sh  ks_more.cfg

Only post part is different from ks.cfg.

%post --nochroot
chvt 3
exec > /dev/tty3 < /dev/tty3
SOURCE_DIR=/mnt/source/others
TARGET_DIR=/mnt/sysimage/usr/src
R_TARGET_DIR=/usr/src
mkdir -p $TARGET_DIR
#default set
cp $SOURCE_DIR/set.sh $TARGET_DIR
echo "#!/bin/sh" >> /mnt/sysimage/tmp/run
echo $R_TARGET_DIR/set.sh >> /mnt/sysimage/tmp/run
#mysql
echo "Do you want to install MySQL?[y/n]"
read answer
if [ $answer == "y" ]; then
cp $SOURCE_DIR/perl-DBI-1.32-5.i386.rpm $TARGET_DIR
cp $SOURCE_DIR/MySQL-server-standard-4.1.13-0.rhel3.i386.rpm $TARGET_DIR
cp $SOURCE_DIR/MySQL-client-standard-4.1.13-0.rhel3.i386.rpm $TARGET_DIR
cp $SOURCE_DIR/mysql.sh $TARGET_DIR
echo $R_TARGET_DIR/mysql.sh >> /mnt/sysimage/tmp/run
fi
#qmail
echo "Do you want to install qmail?[y/n]"
read answer
if [ $answer == "y" ]; then
echo "Input FQDN of your mail server"
read mail_server
cp $SOURCE_DIR/checkpassword-0.90.tar.gz $TARGET_DIR
cp $SOURCE_DIR/qmail-1.03.tar.gz $TARGET_DIR
cp $SOURCE_DIR/ucspi-tcp-0.88.tar.gz $TARGET_DIR
cp $SOURCE_DIR/qmail.sh $TARGET_DIR
echo "$R_TARGET_DIR/qmail.sh install" >> /mnt/sysimage/tmp/run
echo "echo $mail_server | $R_TARGET_DIR/qmail.sh setup" >> /mnt/sysimage/tmp/run
fi
chvt 1

%post
chvt 3
chmod 755 /tmp/run /tmp/run
chvt 1   mysql.sh

#!/bin/bash
cd /tmp
rpm -i perl-DBI-1.32-5.i386.rpm
groupadd mysql
useradd -g mysql mysql
rpm -i MySQL*.rpm  qmail.sh

渡瀬さんのスクリプトを使う
set.sh

#!/bin/bash
#ntp
if [ -e /etc/ntp.conf ]; then
mv /etc/ntp.conf /etc/ntp.conf.bak
fi
echo "server dns5.sakura.ad.jp
driftfile /etc/ntp/drift
broadcastdelay 0.008" > /etc/ntp.conf
chkconfig --level 3 ntpd on  
#close useless services
chkconfig microcode_ctl off
chkconfig gpm off
chkconfig mdmonitor off
chkconfig atd off
chkconfig apmd off
chkconfig isdn off
chkconfig pcmcia off
chkconfig autofs off
chkconfig rhnsd off
chkconfig cups off
chkconfig xfs off
chkconfig canna off
chkconfig FreeWnn off
chkconfig rawdevices off
#DNS
echo "nameserver 202.216.224.67
nameserver 202.216.224.66
nameserver 210.188.224.9
nameserver 210.224.172.13
nameserver 202.222.22.172
search localhost" > /etc/resolve.conf